1980's New Old Stock Solid Brass Vintage Bridge Base Plate

Description

You are bidding on a genuine 1980's solid brass bridge plate that was manufactured by Kahler (American Precision Metalworks) back in the 1980's.  These plates were made in various formats for companies such as Charvel, Fender, DiMarzio, and other guitar part dealers in that era.  This brass base plate is NOS (New Old Stock), and has never been used or installed on a guitar.  Key specifications are listed below, and include an E to E string spacing of 2.02".  The base plate is equipped to accept a saddle width of 0.390".  The three trem block mounting holes are spaced at 0.883", or the total mounting hole spacing distance is 1.766".
The hole spacing for the six bridge mounting holes is 0.440", or 2.20" from the center of the two outside bridge mounting holes.  To help facilitate easy reference, this information is summarized below, and in the two photos listed above.  Please contact me if you have any questions, or you require additional information.  Note:  Buyers must have a minimum positive feedback rating of 10 unless you contact me first before bidding.  Otherwise, your bid will be canceled.
E to E String Spacing = 2.02"
Saddle Width             = 0.390"
Trem Block Mounting Hole Spacing = 0.883"
Total Trem Block Hole Spacing for Outside Mounting Holes = 1.766"
Bridge Mounting Hole Spacing Between Each Hole = 0.440"
Hole Spacing Between Outside Bridge Mounting Holes = 2.20"